TDJ70B - BAUDOUIN 70 kvA Tescom Diesel Generators
kVA | kW | |
---|---|---|
STAND BY | 70 | 56 |
PRIME | 63 | 50.40 |
ENGINE | BAUDOUIN | |
ENGINE MODEL | 4M10G70/5 | |
FREQUENCY (Hz) | 50 | |
PHASE | 3 Phase | |
CYLINDER CAPACITY (Lt) | 4,087 | |
FUEL CONSUMPTION (Lt/Sa) | 11,1 | |
FUEL TYPE | Diesel | |
TANK CAPACITY (Lt) | 150 | |
ALTERNATOR | Tescom / Stamford | |
GOVERNOR TYPE | Electronics |
- Remote Control
- Diesel
- 3 Phase
- Easy Maintenance
- 50 Hertz
- Water Cooled
STAND BY RATING (ESP)
It is the way that generators operate under variable load at certain time intervals. It can work as a backup power. It is not suitable to work under extreme load.
PRIME RATING (PRP)
Applicable for supplying power to varying electrical load for unlimited hours. 10% overload capability is available for a period of 1 hour within 12-hour perod of operation.
CONTINUOUS OPERATION
It is the continious working under constant load. Unlimited hours use of all (100%) of the defined power. It cannot be overloaded above the defined power. For use where there is no mains power.
CANOPY STANDART SPECIFICATIONS
- Compact design connection with non-welded nuts and bolts.
- Integrated canopy,generator set,exhaust system fuel tank.
- Body made from steel components treated with polyester powder coating
- Easy access to all service points
- Exhaust system inside canopy
- Large doors on each side
- Control panel viewing window in a lockable access door
- Emergency stop push button mounted on cabin exterior
- Fuel fill and battery can only be reached via lockable access doors.
- Customer options available to meet your applications needs.
- TESCOM makes its generating sets noise level tests in accordance with directive 2000/14/EC validation of the noise level test has been aproved by the notified body Szutest (CE conformıty assessment body)
ENGINE FEATURES
- Heavy duty generator engine
- 4-stroke, water cooling, natural suction system
- Mechanical governor system
- 12/24 volt starter motor and charge alternator
- Replaceable; with air, fuel and oil filters
- With flexible fuel hose
- Oil drain valve and extension hose/oil drain pump
- Industrial capacity muffler and exhaust spiral or compensator
- Maintenance-free type starter battery
- Engine block water heater (avaliable for automatic models)
- Diesel generator maintenance and operation manual and electrical diagrams
ALTERNATOR FEATURES
- Brushless, single bearing, flexible disc 4-pole synchronous alternator
- H Insulation class
- IP21-23 protection class
- Shunt excitation
- Electronic voltage regulator
- Stator winding 2/3 step against harmonic distortions
- Alternator windings are protected with isolation varnish against oil and acid
CONTROL PANEL FEATURES
- The cable group we use in our generators is fireproof cable class. Cable sheaths form the defense line of cables against various chemicals and flame.
- The use of Halogen-free materials in the outer sheath of the cables prevents the spread of toxic gases during a fire. At the same time, fireproof cable sheaths have low smoke density and flame retardant properties. This feature of fireproof cable sheaths prevents the spread of fire and minimizes possible damages
- Schneider Electric breaker group is used in generator control panels. As a standard, all our products have a 4-pole MCCB (Molded Case Circuit Breaker)
ATS (AUTOMATIC TRANSFER SWITCH) GENERAL FEATURES
- The SQ5 Dual Power Automatic Transfer Switch Series is a kind of automatic transfer switch that combines the switch and the logic controller, enabling the mechanical and electrical to become an inseparable whole.
- Superior electromagnetic compatibility, high resistance to interference.
- It has zero-time transfer technology with high reliability.
- It cuts the dual circuit power simultaneously.
- In addition to PLC remote control, it has a multi-circuit input / output interface that can automate the system.
ATS MODEL | GENERATOR POWER RANGE |
---|---|
100 A TRANSFER PANEL WITH TRANSFER SWITCH | 0-70 kVA |
160 A TRANSFER PANEL WITH TRANSFER SWITCH | 82-124 kVA |
250 A TRANSFER PANEL WITH TRANSFER SWITCH | 125-165 kVA |
400 A TRANSFER PANEL WITH TRANSFER SWITCH | 220-275 kVA |
630 A TRANSFER PANEL WITH TRANSFER SWITCH | 300-440 kVA |
800 A TRANSFER PANEL WITH TRANSFER SWITCH | 500-550 kVA |
1000 A TRANSFER PANEL WITH TRANSFER SWITCH | 660-715 kVA |
1250 A TRANSFER PANEL WITH TRANSFER SWITCH | 750-825 kVA |
1600 A TRANSFER PANEL WITH TRANSFER SWITCH | 900-1100 kVA |
2000 A TRANSFER PANEL WITH TRANSFER SWITCH | 1250 kVA |
2500 A TRANSFER PANEL WITH TRANSFER SWITCH | 1400-1600 kVA |
CONTROL SYSTEM
The new TESCOM TCM01 genset controllers are a cost effective modular genset controller ready for internet monitoring through plug-in modules. Its main advantages are multifunctionality, support for multiple topologies, harmonic analysis and detailed power measurements.
Different brand controller can be offered upon request. (DEIF AGC 150, DEIF SGC 120/12, DEIF SGC 420/421, Datakom D500, DEEPSEA 6120, DEEPSEA 7320, ComAp AMF25)
DESCRIPTION
Software features are complete with easy firmware upgrade through USB port. The Windows based PC software allows monitoring and programming through USB, RS-485, RS-232, Ethernet and GPRS. The Rainbow Scada web service allows monitoring and control of an unlimited number of gensets from a single central location.
MAJOR FEATURES
- Diesel and gas genset support
- 400Hz operation support
- 400 event logs, full snapshot
- All parameters front panel editable
- 3 level configuration password
- 128x64 graphical LCD display
- Downloadable languages
- Waveform display of V & I
- Harmonic analysis of V & I
- 16Amp MCB & GCB outputs
- 8 configurable digital inputs
- 6 configurable digital outputs
- 3 configurable analog inputs
- Both CANBUS-J1939 & MPU
- 3 configurable service alarms
- Multiple automatic exerciser
- Weekly operation schedule
- Dual mutual standby with equal aging of gensets
- Manual “speed fine adjust” on selected ECUs
- Automatic fuel pump control
- Disable protections feature
- Excess power protection
- Reverse power protection
- Overload IDMT protection
- Load shedding, dummy load
- Multiple load management
- Current unbalance protection
- Voltage unbalance protection
- Fuel filling & fuel theft alarm
- Battery back-up real time clock
- Idle speed control
- Battery charge run enabled
- Combat mode support
- Multiple nominal conditions
- Contactor & MCB drive
- 4 quadrant genset power counters
- Mains power counters
- Fuel filling counter
- Fuel consumption counter
- Modem diagnostics display
- Configurable through USB, RS-485, Ethernet and GPRS
- Free configuration program
- Allows SMS controls
- Ready for central monitoring
- Mobile genset support
- Automatic GSM geo-location
- Easy USB firmware upgrade
- -40°C operation with optional display heater
- IP65 rating with optional gasket
COMMUNICATION
- USB Device
- J1939-CANBUS
- Geo-locating through GSM
- Internet Central Monitoring
- SMS message sending
- E-mail sending
- Free PC software: Rainbow Plus
- Modbus RTU (2400-57600baud)
- Modbus TCP/IP
PLUG-IN MODULES
- GSM Modem (2G-3G-4G)
- Ethernet 100Mbps
- Wi-Fi (802.11 b/g/n)
- RS-485 (2400-57600baud)
- RS-232 (2400-57600baud)
MEASUREMENTS
- Mains & genset PN/PP voltages
- Mains & genset frequency
- Mains & genset phase currents
- Mains & genset neutral currents
- Mains & genset, phase & total, kW, kVA, kVAr, pf
- Engine speed
- Battery voltage
FUNCTIONALITIES
- AMF unit
- ATS unit
- Remote start controller
- Manual start controller
- Engine controller
TOPOLOGIES
- 3 ph 4 w, star & delta
- 3 ph 3 w, 2 CTs
- 2 ph 3 w
- 1 phase 2 wires